|
| Dewalt/Black
& Decker 18" Industrial RAS |
|
| SN
68110052 |
5
HP, 220/440/3/60, 27" stroke, 1" diameter arbor with
space for small dado, all adjustments for tilting, angling,
ripping; disconnect
Can be shown under power in Martinsville, VA |
| $1,500
FOB Martinsville, VA |
|
Extra charge
for skidding or crating if necessary.
|
|
| Used
Gabbiani SA 350 Dip Chain Gang Ripsaw |
|
50
HP, 440/3/60, 4-1/2" max thickness capacity, 11-3/4"
wide replaceable insert chain, two sleeves & some blades
& spacers, three hold-down rollers with mechanism for mounting
wooden holddown plate, two upper & one lower set of anti-kickback
fingers,
5" area to right of rightmost blade, 3 HP variable feed
to 120 FPM, up to 13" dia. blades, ampmeter, auto chain
oiler, approx. 78" x 52" footprint, steel legs added
for table height of 36.5"
Can be demonstrated under power in Martinsville, VA |
| $8,900
FOB Martinsville, VA |
|
Extra charge
for skidding or crating if necessary.
|
|
| Used
Campbell Model 80 CNC Router |
|
| SN
5C230584 |
| Three
heads each on two tool carriers, 15 HP spindle motors; two zone
work table, approx. 65" x 50" each; Allen - Bradley
8400 controller, programs are tape loaded; dust hoods; Addition
of new controller would make this a very good machine or valuable
to existing Campbell user for hard to find spare parts. |
| $5,500;
FOB Martinsville, VA |
|
Extra charge
for skidding or crating if necessary.
|
|
|
|
| Used
OGAM PO-280 Dip Chain Gang Rip Saw |
|
50
HP; 230/3/60
11-3/4" wide chain for max. 11" rip between blades,
4-1/4" thickness capacity, can use from 8" to 14"
dia. blades, 70 MM arbor dia., manual raise & lower of blade
arbor & hold-down mechanism, two hold-down rollers &
wooden hold-down board mechanism, two upper & one lower
set of anti-kickback fingers, variable speed feed up to 120
FPM, solid link steel ribbed chain, one upper dust hood with
close off, auto chain oiler with wire brush cleaner, ampmeter,
some blades & spacers, two sleeves, fence, disconnect, approx.
68" x 58" foot print,
Can be demonstrated under power upon request in Martinsville,
VA |
| $7,900;
FOB Martinsville, VA |
|
Extra charge
for skidding or crating if necessary.
|
|
|
